Online Store

Modules, Development Kits and Software on Low - Power Embedded Wi-Fi
Store   |  Chips  |   GS1011SoC
Locate Local Distributors & Reps
No Image Available
GS1011SoC Sample Pack of 100

Product Overview

The GS1011 device is a highly integrated ultra low power wireless single chip which contains an 802.11b radio, media access controller (MAC) and baseband processor, on-chip flash memory and SRAM, and an applications processor all on a single package. The GS1011 supports the full 802.11b (11Mbps) data rates providing scalability on data throughput for higher bandwidth application while still providing the ultra low power consumption for years of battery life. Along with its embedded software stack it offers a highly scalable, reliable, manageable and secure wireless link to meet the growing demand of wireless sensor networks utilizing the broadly accepted IEEE 802.11b,g,n standards infrastructure. This solution is ideal for use in healthcare, smart energy, building automation, industrial and commercial automation, and consumer applications. In addition, the solution provides capabilities such as location awareness which also make it well suited for logistics and supply chain applications for tracking asset location and status.

Block Diagram

GS1011 Block Diagram

Features

  • Highly Integrated wireless SOC with 802.11 radio, MAC and Baseband, Integrated PA, Application CPU, RTC, SRAM and FLASH
    • Reduces system cost of implementing separate devices and lowers design complexity
    • Ultra small form-factor reduces board space
  • Supports IEEE 802.11
    • Lowers customer's total cost of ownership (TCO) in network implementation and management
    • Seamlessly integrates with existing 802.11b/g infrastructure and utilizes the 802.11 security, manageability, easeof-use, and quality of service
    • Supports full 802.11b data rates (up to 11 Mbps) for higher bandwidth applications
  • 802.11i/WPA2* Authentication, AES* Hardware encryption
    • Enterprise level security & reliability for sensor networks
  • Power Management
    • Optimized for battery powered application with very low power consumption for multiple years of battery life
  • Location Awareness
    • Enables users to trace and monitor assets
  • Multiple I/O: SPI*, UART, PWM, I2C*, ADC, GPIO
    • Provides flexibility in system design for easier integration
  • Firmware, Device drivers, Reference Application SW, APIs, and SDK
    • Reduces customer development time for application software enabling faster time to market
  • Seamless HW upgrade to current designs
    • Pin and package compatible with GS1010, makes it drop in replacement onto current GS1010 designs

Specifications

SpecificationGS1011
Dual-Core Processors Two 32-bit ARM7 CPU @44MHz
1 for applications (APP) : 1 dedicated to radio (WLAN)
On Board Memory RAM 128KBytes , FLASH 384KBytes, ROM 80KBytes
Radio (Data Rates) 802.11 (Wi-Fi) b/g compatible
Rates Supported: 11, 5.5, 2 and 1 Mbps (CCK/QPSK/BPSK Modulation)
Security 802.11i (WPA2 - PSK, WPA, WEP), Authentication, AES Encryption
RF Power 9dbm typical (estimate)
Range 50-70M Indoor, 200-300M+ Outdoor (Typical Estimate)
Operating Temp Range -40 to +85 °C industrial temp
Location Awareness RSSI
Software Protocol Support TCP/IP, UDP, SNMP, RTOS
*Standby State
with RTC
1- 5uA depends on voltage on RTC *lowest power state
Package 10 x 10 x 0.85 mm; 102-pin dual row QFN; RoHS compliant
Pin and Package compatible with GS1010
I/Os UART (2), I2C, SPI (2), ADC (2), PWM (3), GPIO (32)

The GS1011 is an 802.11b ultra-low-power single chip ideal for use in the design of embedded applications that can benefit from connectivity to smartphones, tablets, PCs or the internet:

  • Contains 802.11b radio, MAC, and baseband processor, on-chip Flash and SRAM.
  • I/O interfaces: SPI, UART, GPIO, I2C, ADC, and JTAG
  • 102-pin, QFN package, RoHS compliant
  • Pack of 100 quantities

PRODUCT CATEGORIES


Please provide feedback and help us improve our website.